top of page
A Global Industry Solution to An Age Old Problem!
THE STRUTTER
"For Maximum Strength"
The Strutter Socket is used on strut to install a 1/2" bolt for maximum strength. The shear strength of a 3/8" bolt is 4900 lbs. The shear strength of a 1/2" bolt is 8700 lbs. You don't have to add extra washers when installing the 1/2" bolt in the strut. Also, the 1/2" bolt fills the slot in the strut much tighter than the 3/8" bolt. The Strutter Socket can be turned sideways, put into the strut, then slid over to the 1/2" bolt and tightened up. Before, you could only install the 3/8" bolt, but now, for heavy loads and maximum strength, The Strutter Socket is the best tool for the job. Torque bolts to manufacturer's specifications.
Product No. 1687DDC19
THE BEAMER
"For Square Headed Bolts"
The Beamer Socket is used to tighten 1/2" and 3/8" square headed bolts in beam clamps, window brackets and all other strut fittings. It is an excellent option to save time and is much more efficient to use. With The Beamer, you can torque square headed bolts to manufacturer's specifications. You could not do this before. To tighten the 1/2" square bolt, use the 1/2" Beamer socket. To tighten the 3/8" square bolt, install the Beamer Socket onto a 1/2" drive ratchet. The Beamer Socket also comes a 3/8" to 1/2" adaptor for 1/2" square plug removals.
Product No. 1687GJA
STRUTTER/BEAMER COMBO PACK
Now Available Side-By-Side!!
Why choose one or the other when you can have both? The Strutter and Beamer are available in Combo-Packs now!
bottom of page